Lavatube Mini Kit - Red
The Lavatube comes with a standard 510 style connector. You can even use eGo style atomisers as long as you buy a 510-eGo adapter.
The Lavatube VV Mod comes with built in circuit/switch protection. This means that you cannot push the switch over 2.5amps of load. The great thing about this is that rather than simply not working/displaying an error the Lavatube will automatically put the voltage down to an acceptable level and carry on working!
The Lavatube also has regulated voltage output which keeps the voltage exactly the same each time you use it. As your 18350 battery continues to drain the Lavatube regulated voltage will always output at the same level!
Activation protection cuts in at 10 seconds. This means if you try and use the Lavatube for longer than 10 seconds it will simply cut off in order to protect you and your atomisers!
Reverse battery protection - Don't know your negative from your positive? Don't worry if you put the battery in the wrong way the device simply won't work. In addition if your battery becomes discharged the Lavatube will protect itself and your battery by shutting off.
It can be be adjusted from 3.0 to 6.0 volts in 0.1 increments.
It has 4 buttons on it:
- Red button - Hold for 5 seconds turns the power on, hold again for 5 seconds to turn the power off.
- Large Red button - activates the atomiser at the set voltage.
- Black + and - buttons increase the voltage up and down in 0.1 increments
- Hold the + and - buttons for five seconds to lock the buttons to avoid changing the voltage accidently
There is a display screen (LED/LCD) to show the voltage you have it set at.
It uses a 18350 rechargeable battery and the excellent trustfire charger which charges two batteries at the same time.
What the kit includes
1 x Lavatube mini body
2 x High Voltage 510 atomisers
2 x 18350 Batteries (850mAh)
1 x Drip Tip
1 x Trustfire Charger
1 x Ego Carry case
1 x Free bottle 10ml eliquid
The Lavatube mini can be used with all atomisers, cartomisers and clearomisers with a 510 thread otherwise an adaptor will be required.
To get use of the full 6.0 volts you will need to use high voltage atomisers (two included), others will work but at a lower voltage.
Please make sure that the batteries are charged for at least 8 hours before the first use...